Adzuna logo

Design Engineer III (HR - 4367)

Location: Pike County, OH
Company: Fluor B&W
Hours: Full time
Apply for this job

Design Engineer III

Job Code: DESENG06

Grade Level: 12 (Exempt)

PER FPB Policy FBP-HR-PRO-00001: Internal employees must be in current position for (1) year or greater to be eligible to apply.

Position Overview

Under general supervision, performs Design Engineering job functions as assigned by management. Typical job responsibilities assist and support management in engineering design and development. The specific work assignment may include duties or activities that assist and support management in one or more of the following functional areas: civil, structural, architectural, mechanical, electrical or chemical in addition to other duties as assigned:

  • Performs with tracking and trending of Design performance
  • Performs maintenance/supports Design operability or engineering evaluations when necessary
  • Prepares dispositions problem reports on assigned projects
  • Performs project engineering functions involving monitoring of progress and preparation of procedures
  • Identifies and evaluates project issues and problems
  • Assists in the preparation of forecasts, quality take-offs and change orders
  • Assists in preparation of scheduling, estimates, progress reports, meetings, procurement activities, etc. necessary to support project activities utilizing professional engineering techniques with a wide latitude for independent action and decision
  • Conducts feasibility studies and evaluates potential technologies
  • Performs research to analyze and validate design or theory concepts
  • Perform technical review, troubleshooting and day to day technical support for maintenance, operations and other engineering groups
  • Utilize vendor data and work with personnel from other disciplines, as required, for performance of designs
  • Interfaces with other technical and production organizations to compile the technical information required to prepare the documentation
  • May serve as a resource for lower level positions
  • Provides assigned technical or functional support to operations and team members
  • Performs a variety of tasks moderate complexity in nature
  • Other job related duties as assigned
  • Maintains knowledge of and demonstrates ability to perform work safely in accordance with all approved safety policies, procedures and applicable regulations and performs assigned duties in a safe manner
  • Actively participates in Safety Work Groups

Essential Job Functions

  • Initiate, disposition, review and approve engineering change requests.
  • Provide technical guidance and reviews of proposed design.
  • Review and disposition FBP and Contractor non-conformance reports, requests for information, Contractor technical submittals and work plans.
  • Perform walkdowns/inspections for civil construction including earthwork, grading, roads, structures, geosynthetics. Participate in Contractor daily and weekly briefings and meetings.

Working Conditions

Work is normally in an office environment at a normal environmental restoration atmosphere (outdated and/or abandoned facilities). Some exposure to excessive heat and cold on limited bases. Must have the ability to climb ladders, and steps. Accurate distance, near and depth vision is required. Foot, eye and hearing protection are required to be worn when working outside of the office environment. Potential exposure to heavy equipment movement hazards, dangerous chemicals/solvents or hazardous and radioactive materials if proper safety procedures are not followed.

Ability to perform sedentary to moderate work, exerting up to 50 pounds occasionally, non-repetitive, up to 20 pounds frequently, repetitive; performing such activities as lifting, lowering, carrying, pushing, pulling, standing, walking, grasping, kneeling, stooping, reaching.

In some cases radiological training may be required including the ability to wear respiratory protection and disposable PPE.

The statements above are intended to describe the general nature and level of work being performed by the person assigned to this position. Principal duties and responsibilities are intended to describe the overall purpose of this job.

This job description does not state or imply that the above are the only duties and responsibilities assigned to this position. Employees holding this position will be required to perform job-related duties as requested by management. All requirements are subject to modifications to reasonably accommodate individuals with a disability.

Required Contingencies:

  • Pre-Employment Physical (office or field work)
  • Drug Screen
  • The ability to obtain/maintain "L" or "Q" Clearance one year from hire date
  • Background Check
  • Any site required training

Prospective employees must be available to start work with Fluor-BWXT Portsmouth LLC within a reasonable time frame after acceptance of FBP’s offer of employment (typically 30 days or less).

Applicants for employment can initiate a request for accommodation, or obtain information concerning accommodations if contacted by the Company for an Interview.

As a reminder, all internal employees of Fluor-BWXT Portsmouth LLC must submit a current resume. External candidates must also submit a current resume.

Fluor-BWXT Portsmouth LLC is an equal opportunity employer that recognizes the value of a diverse workforce. All qualified individuals will receive consideration for employment without regard to race, color, age, religion, sex, sexual orientation, national origin, disability, and/or protected veteran status in accordance with governing law.



Required Skills

Knowledge and experience with the installation of geosynthetics.

Intermediate understanding of pertinent codes and governing regulations and industry practices

Intermediate knowledge of applicable codes and standards as well as project procedures

Strong interpersonal and communication skills

Understanding of multiple engineering disciplines

Must possess a DOE “L” clearance or the ability to obtain a DOE “L” Clearance



Required Experience

Minimum Requirements

BS degree in civil engineering or a related field and 5 year of related experience, or an equivalent combination of education and experience is required. Background in civil construction, knowledge of soil mechanics, and experience in field construction. Typical experience ranges from 5 - 8 years.



Knowledge and experience with the installation of geosynthetics.

Intermediate understanding of pertinent codes and governing regulations and industry practices

Intermediate knowledge of applicable codes and standards as well as project procedures

Strong interpersonal and communication skills

Understanding of multiple engineering disciplines

Must possess a DOE “L” clearance or the ability to obtain a DOE “L” Clearance



Minimum Requirements

BS degree in civil engineering or a related field and 5 year of related experience, or an equivalent combination of education and experience is required. Background in civil construction, knowledge of soil mechanics, and experience in field construction. Typical experience ranges from 5 - 8 years.

Apply for this job

Salaries

The number of jobs in each salary range for all:

Similar jobs

System Engineer II/III/Sr. (HR - 3832)
Fluor B&W
Piketon, 45661
Software Developer II/III (HR-4312)
Fluor B&W
Piketon, 45661
WM Associate I/II/III (HR - 4319 - 4320)
Fluor B&W
Piketon, 45661
Nuclear Safety Engineer II (HR - 3828)
Fluor B&W
Piketon, 45661